All Resources

Rain Gauge Investigation

In this activity, students create a Rain Gauge to place outdoors. This can be used to measure the rate of precipitation in their neighbourhood.

Precipitation is the process occurs when water falls from clouds to the ground. It can happen as rain, snow, sleet, or hail. The rate of precipitation varies seasonally and regionally.

rain gauge (also known as an udometerpluviometerombrometer, and hyetometer) is an instrument used by meteorologist (scientist who study weather) and hydrologists ( scientists who study water) to gather and measure the amount of liquid precipitation over a predefined area, over a period of time. It is used for determining the depth of precipitation (usually in millimeters ) that occurs over a unit area and thus measuring rainfall amount.

In Vancouver, the rainy season is winter and very little rain falls during the summer. Rain gauges are great tools to use for monitoring changes in precipitation over time. They are used by scientists to predict how much water we will have in stored in our reservoirs and to predict how much water we can use in dryer periods. 

Objectives

  • Describe what a rain gauge is and how it works.

Materials

  • Per Student:
    750 mL plastic container (yogurt container, jar or other, opening should be same size as body)

  • Per Class:
    5  of 60 mL measuring cups (1/4 cup)
    5 buckets of water
    10 waterproof markers

    Optional:  5 of 5 ml ( 1 tsp) and 5  of 15mL ( 1TSP) Tsp measuring spoon for a more detailed level of precipitation measurement &  smaller plastic containers ( 350 ml)

Key Questions

  • Where is a good place to set up the rain gauge? In the open? Under an overhanging roof? Unger a tree?
  • What could effect rainfall into the gauge? What could increase or decrease it an effect accuracy of the results?
  • What role might evaporation play over time?

What To Do

Set-up

  1. Set up 5 tables with a  measuring cup (60mL = 1/4 cup), 2 waterproof markers and 1 bucket of water at each table.
  2. Divide the class into 5 groups. One group will work at each table.
  3. Hand out a plastic container to each student.

Instructions

  1. Have students take turns to fill the 60 ml (1/4 cup) measuring cup with water from the bucket. Then, have the students pour the water into their own container. Repeat until everyone in their group has filled their containers.
  2. Have each student mark the water level with a marker on the side of their container, and label the water level at 60 mL.
  3. Once everyone in the group has poured, marked, and labeled the 60 mL amount, have students repeat steps 1 and 2, increasing the amount each time by one measuring cup worth. The marks on their container should read 60 mL, 120 mL, 180 mL, 240 mL, 300 mL, etc.
  4. Once each student reaches the top, they should empty the rain gauge water back into the bucket on their table.
  5. Finally, students can place their rain gauge outside and record how much rain is received each day/week/month.

NOTE: To accurately measure precipitation over time it is best to record observations after EVERY  rainfall. This will keep loss of water to the air via evaporation from effecting results.
For this reason you may wish to start with markings of less than 60 mL, like 5ml (1 teaspoon = 1tsp), 15mL (1 Table spoon = 1Tsp), ect.

Dry variation:

Preparation

  1. Prepare one container with the volume markings already labelled. Substitute the measuring cup and water bucket with this template container.

Instructions

  1. Have student use the template container to mark the same measurement marks on their own containers.

          NOTE: for this to work all Rain Gauge containers much be identical in shape and size.

Extensions

  • Calculate the area of the circle for the container used as the rain gauge. Measure across the widest part of the container opening, then divide by 2 to get the radius. Area is equal to 3.14 x radius squared (A = pi r^2) This will allow students to record the rainfall over a certain arean over a certain time.
  • Measure the rainfall for an entire month, recording daily rainfall on a chart. Plot the rainfall chart on a graph, and compare week to week (or extend for a season or school year).
  • What role might evaporation play over time? How might it effect measurement of water left to stand in the rain gauge?
  • How might different kinds of precipitation ( rain, sleet, snow, hail) effect the measurements taken?
  • Check the level of the Metro Vancouver reservoir — is the curve going up or down? What does that mean?
  • Make a large rainwater catchment system for your school or home. Attach it to your eavestroughs or downspouts and see how much water you can collect.

Other Resources

MetroVancouver |Watersheds & Reservoirs

MetroVancouver | Exploring Our Watershed PDF

MetroVancouver | Reservoir Levels & Water Use

About the sticker

Survivors

Artist: Jeff Kulak

Jeff is a senior graphic designer at Science World. His illustration work has been published in the Walrus, The National Post, Reader’s Digest and Chickadee Magazine. He loves to make music, ride bikes, and spend time in the forest.

About the sticker

Egg BB

Artist: Jeff Kulak

Jeff is a senior graphic designer at Science World. His illustration work has been published in the Walrus, The National Post, Reader’s Digest and Chickadee Magazine. He loves to make music, ride bikes, and spend time in the forest.

About the sticker

Comet Crisp

Artist: Jeff Kulak

Jeff is a senior graphic designer at Science World. His illustration work has been published in the Walrus, The National Post, Reader’s Digest and Chickadee Magazine. He loves to make music, ride bikes, and spend time in the forest.

About the sticker

T-Rex and Baby

Artist: Michelle Yong

Michelle is a designer with a focus on creating joyful digital experiences! She enjoys exploring the potential forms that an idea can express itself in and helping then take shape.

About the sticker

Buddy the T-Rex

Artist: Michelle Yong

Michelle is a designer with a focus on creating joyful digital experiences! She enjoys exploring the potential forms that an idea can express itself in and helping then take shape.

About the sticker

Geodessy

Artist: Michelle Yong

Michelle is a designer with a focus on creating joyful digital experiences! She enjoys exploring the potential forms that an idea can express itself in and helping then take shape.

About the sticker

Science Buddies

Artist: Ty Dale

From Canada, Ty was born in Vancouver, British Columbia in 1993. From his chaotic workspace he draws in several different illustrative styles with thick outlines, bold colours and quirky-child like drawings. Ty distils the world around him into its basic geometry, prompting us to look at the mundane in a different way.

About the sticker

Western Dinosaur

Artist: Ty Dale

From Canada, Ty was born in Vancouver, British Columbia in 1993. From his chaotic workspace he draws in several different illustrative styles with thick outlines, bold colours and quirky-child like drawings. Ty distils the world around him into its basic geometry, prompting us to look at the mundane in a different way.

About the sticker

Time-Travel T-Rex

Artist: Ty Dale

From Canada, Ty was born in Vancouver, British Columbia in 1993. From his chaotic workspace he draws in several different illustrative styles with thick outlines, bold colours and quirky-child like drawings. Ty distils the world around him into its basic geometry, prompting us to look at the mundane in a different way.